Tag «time measurement»: downloads
Search results for «time measurement»:
Units of measurement for Ada 2.1 by Dmitry Kazakov
Units of measurement for Ada library provides an implementation of dimensioned values for Ada. Unit checks are made at run-time, if not optimized out by the compiler. SI and irregular measurement units are supported.
Shifted units like degrees Celsius are supported too. Conversions from and back…
Expat Converter 1.0 by Mac Games and More
Expat Converter is a simple measurement units converter.
Most of the world uses the METRIC system! Not only that, the metric system seems to make much more sense over the Imperial System (aka The English System) because of the convenient use of the units of 10.
That said, when someone says it…
NetMate 0.9.4 by S. Zander
NetMate comes from Network Measurement and Accounting System and is a flexible and extensible network measurement tool (meter).
It can be used for accounting, delay/loss measurement, packet capturing and much more. The main advantage over other existing tools is that it can be easily extended due…
MetEngVerter 1.0 by Capaho Web
MetEngVerter Metric/English Measurement Converter by Capaho Web provides reasonably accurate conversions between selected metric and English measurements for household and other general use.
MetEngVerter may be freely distributed in its original, unaltered state. It is provided free of charge as-…
SmokePing 2.0.9 by Tobias Oetiker
SmokePing is a delux latency measurement tool. SmokePing project can measure, store and display latency, latency distribution and packet loss. SmokePing uses RRDtool to maintain a longterm datastore and to draw pretty graphs, giving up to the minute information on the state of each network connectio…
Hardware Monitor applet 1.3 by Ole Laursen
The Hardware Monitor applet is a small program for the Gnome panel which tries to be a beautiful all-round solution to hardware monitoring.
It also tries to be user-friendly and generally nice and sensible, integrating pleasantly with the rest of your Gnome desktop.
Here are some key features…
KOJAK 2.2b2 by KOJAK Development Team
KOJAK (Kit for Objective Judgement and Knowledge-based Detection of Performance Bottlenecks) is a set of generic and interoperable tool components designed for the performance analysis of parallel applications.
Their functionality addresses the entire analysis process including instrumentation, p…
Iometer 2006-07-27 RC3 by Ming Zhang
As the Iometer User's Guide says, Iometer is an I/O subsystem measurement and characterization tool for single and clustered systems.
Iometer was originally developed by the Intel Corporation and announced at the Intel Developers Forum (IDF) on February 17, 1998 - since then it got wide spread wi…
Hardware Monitor 1.3 by Ole Laursen
Hardware Monitor is a multi-purpose, beautiful system-monitoring applet.
The Hardware Monitor applet is an applet for the GNOME panel which tries to be a beautiful all-around solution to system monitoring. It also strives to be user-friendly and generally nice and sensible, integrating pleasantl…
mod_arm 0.05 by David Carter
mod_arm provides a simple, seamless, and application independent interface to ARM (Application Response Measurement).
mod_arm allows system administrators to get an accurate idea of how long an application takes on a running server - for a single instance or as a step in a multi-tier transaction.…
KFilter 3.1 by Martin Erdtmann
KFilter is a tool to design acoustic loudspeakers in the theoretical way. It provides an interactive analysis of the equivalent analogue circuit design.
This is useful to create a good draft construction which can be improved by further measurement. Future measurement features are planned.
NDisc6 0.7.0 by R?mi Denis-Courmont
ndisc6 consists of two small command line tools (ndisc6 and rdisc6) that perform ICMPv6 Neighbor Discovery and ICMPv6 Router Discovery respectively.
NDisc6 is primarily meant for IPv6 networking diagnostics or to detect rogue IPv6 nodes or routers on an Ethernet segment.
What's New in This Rel…
Network Time Tools 0.8.1 by Adam Guyot
Network Time Tools (NTT) is a set of network tools designed to provide monitoring of a network and the services on that network, and provide various reports on the hosts/services and optional alerts via email, pager, and cellphones. It also has the capability to send messages on user-specified servi…
IOzone 3.271 by Capps
IOzone is a filesystem benchmark tool. The benchmark generates and measures a variety of file operations. Iozone has been ported to many machines and runs under many operating systems.
Iozone is very useful for performing a broad filesystem analysis of a vendor's computer platform. The bench…
ltraf 0.2.1-pre1 by Karoly Kiss
ltraf is a simple utility to list traffic flowing through a computer's network interface. It can categorize the traffic based on bpf rules. It uses libpcap to capture network traffic.
The main goal of the project is to give systems administrators a chance to visualize the traffic flow through a l…
Tstat 1.0.1 by Marco Mellia
Tstat provides information about classic and novel performance indexes and statistical data about Internet traffic.
It collects measurement indexes at both the network (IP) layer and transport (TCP/UDP) layer.
Real time protocols (RTP/RTCP) are also analyzed, allowing you to get statistical me…
PyVISA 1.1 by Torsten Bronger
The programming of measurement instruments can be real pain. There are many different protocols, sent over many different interface and bus systems. For every programming language you want to use, you have to find libraries that support both your device and its bus system.
In order to ease this u…
TAPPy 0.5.1 by Tim Cera
TAPPY is a tidal analysis package. TAPPy breaks down a record of water levels into the component sine waves. It is written in Python and uses the least squares optimization and other functions in SciPy.
The focus is to make the most accurate analysis possible. TAPPY only determines the constituen…
GTKNetTraf 1.1.0 by Michael Sheldon
GTKNetTraf is a GTK2 client for the NetTraf remote network monitor.
GTKNetTraf is designed to have a more user friendly and attractive interface than the existing Tk client.
It also provides a few additional features such as measurement unit selection, easily comparable graphs and a builtin c…
vidprofile 0.80 by Joe Friedrichsen
vidprofile project is a collection of a few components designed to fully test mpeg2enc from mjpegtools.
vidprofile was made to answer the question:
Given a file size limit, what are the best mpeg2enc options (and values) to use which give the highest possible quality?
Every component is written i…
- Desktop Environment
- Science and Engineering
- Text Editing&Processing